impl<E> Http1Builder<'_, E>

fn http2(self: &mut Self) -> Http2Builder<'_, E>

Http2 configuration.

fn auto_date_header(self: &mut Self, enabled: bool) -> &mut Self

Set whether the date header should be included in HTTP responses.

Note that including the date header is recommended by RFC 7231.

Default is true.

fn half_close(self: &mut Self, val: bool) -> &mut Self

Set whether HTTP/1 connections should support half-closures.

Clients can chose to shutdown their write-side while waiting for the server to respond. Setting this to true will prevent closing the connection immediately if read detects an EOF in the middle of a request.

Default is false.

fn keep_alive(self: &mut Self, val: bool) -> &mut Self

Enables or disables HTTP/1 keep-alive.

Default is true.

fn title_case_headers(self: &mut Self, enabled: bool) -> &mut Self

Set whether HTTP/1 connections will write header names as title case at the socket level.

Note that this setting does not affect HTTP/2.

Default is false.

fn ignore_invalid_headers(self: &mut Self, enabled: bool) -> &mut Self

Set whether HTTP/1 connections will silently ignored malformed header lines.

If this is enabled and a header line does not start with a valid header name, or does not include a colon at all, the line will be silently ignored and no error will be reported.

Default is false.

fn preserve_header_case(self: &mut Self, enabled: bool) -> &mut Self

Set whether to support preserving original header cases.

Currently, this will record the original cases received, and store them in a private extension on the Request. It will also look for and use such an extension in any provided Response.

Since the relevant extension is still private, there is no way to interact with the original cases. The only effect this can have now is to forward the cases in a proxy-like fashion.

Note that this setting does not affect HTTP/2.

Default is false.

fn max_headers(self: &mut Self, val: usize) -> &mut Self

Set the maximum number of headers.

When a request is received, the parser will reserve a buffer to store headers for optimal performance.

If server receives more headers than the buffer size, it responds to the client with "431 Request Header Fields Too Large".

The headers is allocated on the stack by default, which has higher performance. After setting this value, headers will be allocated in heap memory, that is, heap memory allocation will occur for each request, and there will be a performance drop of about 5%.

Note that this setting does not affect HTTP/2.

Default is 100.

fn header_read_timeout<impl Into<Option<Duration>>: Into<Option<Duration>>>(self: &mut Self, read_timeout: impl Into<Option<Duration>>) -> &mut Self

Set a timeout for reading client request headers. If a client does not transmit the entire header within this time, the connection is closed.

Requires a Timer set by Http1Builder::timer to take effect. Panics if header_read_timeout is configured without a Timer.

Pass None to disable.

Default is currently 30 seconds, but do not depend on that.

fn writev(self: &mut Self, val: bool) -> &mut Self

Set whether HTTP/1 connections should try to use vectored writes, or always flatten into a single buffer.

Note that setting this to false may mean more copies of body data, but may also improve performance when an IO transport doesn't support vectored writes well, such as most TLS implementations.

Setting this to true will force hyper to use queued strategy which may eliminate unnecessary cloning on some TLS backends

Default is auto. In this mode hyper will try to guess which mode to use

fn max_buf_size(self: &mut Self, max: usize) -> &mut Self

Set the maximum buffer size for the connection.

Default is ~400kb.

Panics

The minimum value allowed is 8192. This method panics if the passed max is less than the minimum.

fn pipeline_flush(self: &mut Self, enabled: bool) -> &mut Self

Aggregates flushes to better support pipelined responses.

Experimental, may have bugs.

Default is false.

fn timer<M>(self: &mut Self, timer: M) -> &mut Self
where
    M: Timer + Send + Sync + 'static

Set the timer used in background tasks.

async fn serve_connection<I, S, B>(self: &Self, io: I, service: S) -> Result<(), Box<dyn Error + Send + Sync>>
where
    S: Service<Request<Incoming>, Response = Response<B>>,
    <S as >::Future: 'static,
    <S as >::Error: Into<Box<dyn StdError + Send + Sync>>,
    B: Body + 'static,
    <B as >::Error: Into<Box<dyn StdError + Send + Sync>>,
    I: Read + Write + Unpin + 'static,
    E: HttpServerConnExec<<S as >::Future, B>

Bind a connection together with a Service.

fn serve_connection_with_upgrades<I, S, B>(self: &Self, io: I, service: S) -> UpgradeableConnection<'_, I, S, E>
where
    S: Service<Request<Incoming>, Response = Response<B>>,
    <S as >::Future: 'static,
    <S as >::Error: Into<Box<dyn StdError + Send + Sync>>,
    B: Body + 'static,
    <B as >::Error: Into<Box<dyn StdError + Send + Sync>>,
    I: Read + Write + Unpin + Send + 'static,
    E: HttpServerConnExec<<S as >::Future, B>

Bind a connection together with a Service, with the ability to handle HTTP upgrades. This requires that the IO object implements Send.

impl<'a, E> Freeze for Http1Builder<'a, E>

impl<'a, E> RefUnwindSafe for Http1Builder<'a, E>

impl<'a, E> Send for Http1Builder<'a, E>

impl<'a, E> Sync for Http1Builder<'a, E>

impl<'a, E> Unpin for Http1Builder<'a, E>

impl<'a, E> UnsafeUnpin for Http1Builder<'a, E>

impl<'a, E> UnwindSafe for Http1Builder<'a, E>

impl<T> Any for Http1Builder<'a, E>

fn type_id(self: &Self) -> TypeId

impl<T> Borrow for Http1Builder<'a, E>

fn borrow(self: &Self) -> &T

impl<T> BorrowMut for Http1Builder<'a, E>

fn borrow_mut(self: &mut Self) -> &mut T

impl<T> From for Http1Builder<'a, E>

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for Http1Builder<'a, E>

impl<T> WithSubscriber for Http1Builder<'a, E>

impl<T, U> Into for Http1Builder<'a, E>

fn into(self: Self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

impl<T, U> TryFrom for Http1Builder<'a, E>

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto for Http1Builder<'a, E>

fn try_into(self: Self) -> Result<U, <U as TryFrom<T>>::Error>